Skip to content
Westdance Garage Doors
Broken spring? Get safe, then get it fixed

Garage Door Spring Repair in Denver

Local garage door provider checking a torsion spring above a home garage door in the Denver area

A garage door spring does the heavy lifting. It balances the weight of the door so it moves smoothly by hand or with an opener. When a spring breaks, the door can feel like a slab of dead weight. It may not lift at all.

Westdance Garage Doors is a referral service for homeowners in the Denver area. We do not do the repair. We connect you with an independent local provider in our network who handles spring work every week. Once the new spring is in, steady upkeep helps it last. Dry air, strong sun, heavy snow and hail all wear on a door over the years. A little care after the repair keeps the fix working through every season.

Broken spring? Stop and step back

If you heard a loud bang from the garage, a spring may have snapped. Do not try to lift the door. Do not pull the red release cord unless the door is fully down and you know what you are doing.

Keep kids and pets away from the door. Park the car outside if you can. Then Request a callback to check provider availability for emergency garage service, or send a request through the form.

Get Started

Signs a spring has given up

Some springs fail with a bang. Others fade slowly. Watch for these clues:

  • A loud snap from the garage, then a door that will not rise
  • The opener hums or strains but the door barely moves
  • The door feels very heavy when lifted by hand
  • The door slams down or drops fast
  • A visible gap in the coiled spring above the door
  • The door sits crooked or hangs uneven

If you see any of these, treat it as a spring problem until a provider says otherwise.

Two spring types, two jobs

Most homes use one of two kinds. A provider can tell you which one you have in a few minutes.

Torsion springs

These are coiled bars mounted on a shaft above the door opening. They twist to store energy. They tend to give smoother, steadier motion and often last longer.

Extension springs

These run along each side of the door, parallel to the tracks. They stretch and shrink as the door moves. They are common on older setups and often need safety cables.

Why spring work is not a DIY job

A spring under tension holds a lot of stored force. One slip with a tool can cause serious injury. The parts also have to match the weight of your door. A spring that is too weak or too strong leaves the door out of balance.

Hardware-store springs are often the wrong size. Let an independent provider measure, match and wind the new spring with the right tools.

What a spring visit usually includes

Every provider works a little differently. A typical visit looks like this:

  • A look at the door, springs, cables and tracks
  • Removal of the broken spring and its worn hardware
  • A new spring sized to your door's weight
  • Tension set and the door balanced
  • A test of the opener, sensors and safety reverse

Ask the provider to explain each step before work starts.

Standard or high-cycle springs

A spring is rated by cycles. One cycle is one open and one close. Standard springs often cover roughly 10,000 cycles. High-cycle springs are built for more, sometimes double or beyond.

If your garage is the main family entrance, you may use the door many times a day. A higher-cycle spring may suit that kind of use. Ask the provider what rating they would install and why.

Get Started

Sun, snow and hail: what they do to springs

Our region is hard on metal and moving parts. Intense sun at altitude dries out grease and lubricants. Dry air adds to that. Heavy snow loads and a fast spring melt bring moisture and sharp temperature swings. Cold makes metal stiffer, and springs work harder on frozen mornings.

Hail can dent panels and knock tracks out of place. A door that is off-balance puts extra strain on its springs.

Keep it from happening again

A new spring is a fresh start. A little upkeep helps it reach its full life.

Lubricate twice a year

Spring and fall are good times. Ask your provider which lubricant suits your hardware. Skip heavy grease that attracts dust.

Check track alignment and rollers

Bent or loose tracks make the door drag. That drag adds load to the spring. Track alignment is worth a look after a hail storm or a heavy snow season. Worn rollers should be swapped before they bind.

Do the balance test

With the door closed, pull the release cord and lift by hand to about waist height. A balanced door stays put. If it drops or shoots up, schedule a check.

Look at the opener too

An old opener can strain on a door that is slightly off. If yours is noisy or slow, a provider can advise whether a new garage door opener makes sense.

Doing it right protects your home

The garage is often the largest opening in the house. A door that works well adds to curb appeal and daily comfort. It also shows buyers that the home has been cared for. Fix it, keep it.

Questions to ask the provider

  • Is the spring torsion or extension, and why that choice?
  • What cycle rating will it have?
  • Will you check cables, rollers and tracks too?
  • Is the estimate in writing, with parts and labor listed?
  • What warranty does your company offer on parts and work?
  • Can you suggest a simple upkeep plan afterward?

How the referral works

Westdance Garage Doors does not send out workers. You tell us about the problem, and we pass your request to an independent provider in our network. The provider gives you the quote and does the work. You decide whether to go ahead. There is no obligation to hire.

Request a callback to talk through your situation, or use the request form.

Get Started

What's Included

Spring and cable check

A provider looks over the broken spring, cables and drums to find what else wore out.

Correctly sized replacement

The new spring is matched to your door's weight so it lifts evenly.

Tension and balance

Tension is set, then the door is tested so it rests steady when half open.

Safety and opener test

Sensors, the auto-reverse and the opener are checked before the visit wraps up.

Typical spring repair costs in the U.S.

Prices depend on spring type, door weight, cycle rating and your local market. These ranges are typical for the U.S. only. Always ask for a written quote before work begins, and compare what is listed.

ItemTypical rangeNotes
Single torsion spring replacement$150 – $350Price rises with door weight and wire size
Pair of torsion springs$200 – $500Replacing both is often advised together
Extension spring pair$100 – $300Often needs safety cables as well
High-cycle spring upgrade$250 – $650Built for heavy daily use
Cable or roller replacement$75 – $250Often found during the spring visit
Added emergency garage service$50 – $200Extra for urgent or after-hours visits; varies by provider

Get Started

How It Works

Tell us the problem

Share what you heard or saw, such as a loud snap, a stuck door or a gap in the spring.

We make the referral

Your request goes to an independent provider in our network.

Review the quote

The provider explains the work and costs. Ask for it in writing.

Fix it, keep it

After the repair, ask about upkeep so the spring lasts.

Why Call Westdance Garage Doors

Independent local providers

Providers in our network know the area's weather and common door setups.

Clear referral

Westdance Garage Doors only connects you. The provider quotes the job and does the work.

Upkeep advice

Ask each provider for simple steps to help your new spring last longer.

No obligation

Request an estimate and decide on your own terms.

Other Services

Need garage door spring repair in Denver?

Tell us what your garage door is doing. Send a request through the form or email contact@westdance.homes, and we will point you to a local provider in our network.

No obligation
FAQ

Garage Door Spring Repair FAQ

How do I know if my garage door spring is broken?

Common signs include a loud bang, a door that feels very heavy, an opener that strains without lifting, or a visible gap in the coil. If you see any, stop using the door and ask a provider.

Can I replace a garage door spring myself?

It is not recommended. Springs hold strong stored tension, and a slip can cause serious injury. The replacement also has to match your door's weight. A trained, independent provider has the right tools and sizing know-how.

How long do garage door springs last?

Many standard springs last around 10,000 cycles, which is often several years of normal use. Heavy use, harsh weather and poor balance can shorten that. Regular lubrication and checks help them last.

Contact Us

Request a callback

Tell us what your garage door is doing. Send a request through the form or email contact@westdance.homes, and we will point you to a local provider in our network.

No obligation
Request a callback